GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Pull the forward half of the water deflector away from the door panel in order to access the check link. Refer to Rear Side Door Water Deflector Replacement .

  3. Object Number: 759948  Size: SH
  4. Remove the check link to hinge pillar bolts.
  5. Remove the check link to door nuts (1).
  6. Remove the check link from the door.

Installation Procedure


    Object Number: 759948  Size: SH
  1. Install the check link into the door.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the check link to door nuts (1).
  4. Tighten
    Tighten the nuts to 9 N·m (80 lb in).

  5. Install the check link arm to the center pillar bolt.
  6. Tighten
    Tighten the bolt to 9 N·m (80 lb in).

  7. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  8. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .