GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2003 🢒 CTS - RHD 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Upper Auxiliary Weatherstrip Replacement

Removal Procedure
  1. Lower the window to the full down position.
  2. Remove the rear door stationary window/division channel. Refer to Rear Side Door Stationary Window and Front Channel Replacement .

    3. Object Number: 758744 Size: SH
  3. Remove the screws from the rear door upper auxiliary weatherstrip.
  4. Remove the upper auxiliary weatherstrip.

Installation Procedure

    Object Number: 758744 Size: SH
  1. Install the rear door upper auxiliary weatherstrip onto the door frame.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws working from the front to the rear.

    3. Tighten
    Tighten the screws working from the front to the rear to 2 N·m (18 lb in).

  3. Install the rear door stationary window/division channel. Refer to Rear Side Door Stationary Window and Front Channel Replacement .