GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2003 🢒 CTS - RHD 🢒 General Information 🢒 General Information 🢒 Instrument Panel Insulator Panel Replacement - Right Side

Removal Procedure

    Object Number: 713948 Size: SH
  1. Remove the screw (3) securing the closeout panel to the instrument panel (I/P).
  2. Pull down on the panel in order to release the locking tabs (2).
  3. Disconnect the courtesy lamp electrical connector (1).
  4. Remove the closeout panel from the I/P.

Installation Procedure

    Object Number: 713948 Size: SH
  1. Connect the courtesy lamp electrical connector (1).
  2. Align the closeout panel on the I/P.
  3. Push upward on the panel in order to secure the locking tabs (2).

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the closeout retaining screw (3)

    5. Tighten
    Tighten the fasteners to 2 N·m (18 lb in).