- Inspect the output shaft (562) and the
rear internal gear (560) for the following:
| • | Damaged or worn bushings |
| • | Damaged or worn snap ring (563) |
| • | Damaged or worn gear teeth |
| • | Damaged or worn snap ring groove |
| • | Damaged or cross-threaded threads |
| • | Damaged or worn bearings |
- Install the output shaft (562) onto the
rear internal gear (560).
- Install the snap ring (563) onto the rear internal ring
gear (560). Be sure it is seated in the groove.
- Rotate the transmission 90 degrees.
- Install the ouput shaft assembly (21) into the case (24).
