GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1997 🢒 Catera 🢒 Engine 🢒 Engine Cooling 🢒 Heater Water Auxiliary Pump Replacement

Removal Procedure
  1. Partially drain the cooling system. Refer to Cooling System Draining and Filling .

    2. Object Number: 142126 Size: SH
  2. Disconnect the pump connector.
  3. Remove the pump hoses.
  4. Remove the cruise control module bracket nuts (4).
  5. Remove the bracket.
  6. Remove the pump from the wheelhouse panel.

Installation Procedure

    Object Number: 142126 Size: SH
  1. Install the pump to the wheelhouse panel.
  2. Position the cruise control module bracket.
  3. Install the bracket nuts (4) until fully seated and not stripped.
  4. Install the pump hoses.
  5. Connect the pump connector.
  6. Fill the cooling system. Refer to Cooling System Draining and Filling .