Molding Replacement - Rocker Panel Corner for Cadillac Catera 1999

1. Open the doors.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
3. Remove the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.



4. Drill out the two rocker corner molding rivets. You do not need to remove the rocker molding in order to replace the rocker corner molding.
5. Remove the rear corner molding.

1. Push the rear corner molding into the rocker molding to lock in place.
2. Install the rocker corner molding rivets.
3. Install the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
4. Lower the vehicle.
5. Close the doors.