The Service Bulletins listed below require the following corrections. Please update your bulletins to include these changes.
Serviceman Bulletin Correction ------------------- ----------- Bulletin No: T-85-79A Page 3, The Labor Operation Number File in Group: 3D for Replace Rear Struts - Includes Number: 5 Rear Alignment (T6181) should read Date: Nov. '86 T6180 at 2.4 hours.
Bulletin No: T-86-74 The third paragraph should be changed File in Group: 6A to read: Cars with this condition may Number: 77 require replacement of the following Date: July '86 parts.
Bulletin No: T-87-23 Page 2, Section D, Item 130, File in Group: 7 - First usage should read "Retainer, Number: 144 Selector Lever" Date: Oct '86 - Second usage does not apply to Cadillac and should be deleted.
Page 2, Section D, Item 132 - First usage should read "Bolt" - Second usage does not apply to Cadillac and should be deleted.
Bulletin No: T-87-36 In the first paragraph, delete P/N File in Group: 3D 22062500 Number: 7 Date: Nov '86
Bulletin No: T-87-40 Labor Operation T6183 does not apply File in Group: 8 to 1987 Broughams. Number: 51 Date: Nov '86
Dealer Service Information Bulletin Correction ----------------------------------- ---------- Bulletin No: 87-I-10 The labor operation number for Fender, File in Group: 0 Front (complete), Color Coat, Right, Date: Oct. '86 should be A0680
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.