REVISION: 06/30/95
THIS BULLETIN IS BEING REVISED TO INCLUDE ARTWORK. *********************************************************************
SOME OWNERS MAY COMMENT ON AN INOPERATIVE DRIVER OR FRONT PASSENGER COURTESY LAMP.
COURTESY LAMP RETAINER TO SHEET METAL BINDS THE SWITCH RESULTING IN THE INOPERATIVE CONDITION.
REMOVE RETAINER TO SHEET METAL BEHIND SWITCH BY USING THE FOLLOWING PROCEDURE:
1. REMOVE WINDSHIELD PILLAR GARNISH MOLDING.
2. REMOVE SUN VISOR FROM HEADLINER TO PARTIALLY LOWER HEADLINER.
3. REMOVE COURTESY LAMP FROM HEADLINER, SEPARATE COVER, LENS AND SWITCH FROM HOUSING.
4. USING DIAGONAL SIDE CUTTERS, REMOVE FRONT (SWITCH SIDE) RETAINING CLIP FROM COURTESY LAMP (SEE FIGURE 1, ITEM 1).
5. INSTALL COURTESY LAMP TO HEADLINER.
6. ASSEMBLE COVER, LENS AND HOUSING.
7. SUN VISOR TO HEADLINER.
8. WINDSHIELD PILLAR GARNISH MOLDING.
FOR VEHICLES REPAIRED UNDER WARRANTY, USE:
LABOR OPERATION NUMBER: N1440 (RIGHT LAMP) N1441 (LEFT LAMP) USE PUBLISHED LABOR OPERATION TIME.
FIGURES: 1 ATTACHMENTS: 0
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1995 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.