Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the rear interior compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .

1

High Mounted Stop Lamp Assembly Electrical Connection

Tip
Disconnect the electrical connector.

2

High Mounted Stop Lamp Nuts (Qty: 7)

Tip
Tighten nuts in sequence, as shown.

Tighten
3.5 N·m (31 lb in)

3

High Mounted Stop Lamp Locking Tabs

Tip
Pinch both tabs at each side, second bolt in from the outer edge in order to remove the lamp housing from the rear compartment lid.

4

High Mounted Stop Lamp Assembly

Tip
The high mounted stop lamp is serviced as a unit, light emitting diode (LED) assembly.