Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Position the rear door window approximately half way down in the door.
2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
3. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
4. Tape the window to the door frame to prevent it from moving.
5. Remove the rear door window regulator. Refer to Rear Side Door Window Regulator Replacement .
6. Remove the rear door front lower window channel. Refer to Rear Side Door Window Front Channel Replacement .

1

Window, Rear Door

Tip

1. Remove the tape holding the window to the door frame.
2. Lower the window into the door until it is free of the front and rear run channel.
3. Rotate the rear door window as necessary to remove it from the door.