Caution: The high intensity discharge system produces high voltage and current. In order to reduce the risk of severe shocks and burns, the battery negative cable must be disconnected any time service work is being performed on or around the high intensity discharge system.

Caution: The high intensity discharge system produces high voltage and current. To reduce the risk of severe shocks and burns:

Preliminary Procedure

Remove the headlamp. Refer to High Intensity Discharge Headlamp Replacement .

1

Headlamp Bulb Cover Screw (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Do not remove the front bumper fascia to perform this procedure. Just remove enough fasteners and retainers in order to lower one corner of the bumper fascia to access the bulb.

Tighten
3 N·m (27 lb in)

2

Headlamp Bulb Cover

3

Headlamp Bulb Retention Spring (Qty: 2)

Tip
Release the springs in order to access the high intensity discharge (HID) bulb.

4

Headlamp Bulb Electrical Connector

Tip
Pull the bulb rearward and release the electrical connector from the bulb.

5

Headlamp Bulb

Notice: Refer to Halogen Bulb Caution in the Preface section.

Tip
Pull the headlamp bulb from the headlamp assembly.