Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Open the rear compartment lid in order to access the tail lamp assembly nuts.
2. Remove the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement
3. Pull back either the RH or the LH rear compartment side trim panel in order to access the tail lamp nuts. Refer to Rear Compartment Side Trim Replacement - Right Side or Rear Compartment Side Trim Replacement - Left Side .

1

Nuts, Tail Lamp Assembly (Qty: 3)

Tip
Tighten nuts in sequence as shown.

Tighten
6 N·m(53 lb in)

2

Connector, Chassis Electrical

Tip
Release the connector position assurance (CPA) and disconnect the electrical connector from the LED socket.

3

Lamp Assembly, Tail