Removal Procedure
- If the vehicle is equipped with a column shift lever the traction control
switch is part of the lever and is replaced with the lever. Refer to
Shift Lever Replacement
in Steering Wheel and Column.
- If equipped with a console shift remove
the center console trim plate (1). Refer to
Front Floor Console Trim Plate Replacement
in Instrument Panel, Gages
and Console.
- Remove the traction control switch electrical connector (3).
- Remove the traction control switch (2).
Installation Procedure
- Install the traction control switch (2).
- Install the traction control switch electrical connector (3).
- Install the center console trim plate. Refer to
Front Floor Console Trim Plate Replacement
in Instrument Panel, Gages
and Console (1).