Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Position the rear door window approximately half way down in the door.
2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
3. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
4. Tape the window to the door frame to prevent it from moving.

1

Nut, Rear Door Window Regulator (Qty: 3)

Tip

1. Loosen the window to regulator bolts.
2. Release the window regulator from the window and door.

Tighten
9 N·m (80 lb in)

2

Regulator, Rear Door Window

Tip
Disconnect the electrical connector from the regulator.