Tools Required

J 35917 Ball Joint Remover

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
3. Remove the brake rotor. Refer to Front Brake Rotor Replacement .



4. Remove the wheel stud at the inner most notch in the knuckle on the caliper side of the steering knuckle.
5. Using the J 35917 press out the wheel stud.

1. Install a new wheel stud .
2. Using washers and a wheel nut, pull the wheel stud in position.
3. Install the brake rotor. Refer to Front Brake Rotor Replacement .
4. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
5. Lower the vehicle.