Removal Procedure
- Remove the surge tank nuts and push pin retainer.
- Remove the surge tank from the studs and position the tank aside.
- Remove the engine mount strut bolt.
- Remove the engine mount strut.
Installation Procedure
- Install the engine mount strut.
Notice: Refer to Fastener Notice in the Preface section.
- Install the engine mount strut bolt.
Tighten
Tighten the bolt to 70 N·m (52 lb ft).
- Position the surge tank to the studs.
- Install the surge tank nuts and push pin retainer.
Tighten
Tighten the nuts to 6 N·m (53 lb in).