• | J 45059 Angle Meter |
• | J 41816 Crankshaft Balancer Remover |
• | J 41998-B Crankshaft Balancer Installer |
• | J 44214 Flywheel Holder |
Notice: Refer to Fastener Notice in the Preface section.
Tighten
• | Tighten the bolt a first pass to 50 N·m (37 lb ft). |
• | Tighten the bolt a final pass an additional 120 degrees using the J 45059 . |
Tighten
Tighten the bolts to 181 N·m (133 lb ft).
Tighten
Tighten the bolt to 12 N·m (106 lb in).
Tighten
Tighten the bolts to 47 N·m (35 lb ft).