Use the scan tool data display values and definitions information in order to assist in diagnosing vehicle malfunctions. Compare the vehicles actual scan tool data with the typical data display value table information. Use the information in order to aid in understanding the nature of the concern when the vehicle data does not match the typical data display values.
The scan tool data values were taken from a known good vehicle under the following conditions:
| • | The ignition switch is in the Run position. |
| • | The engine is not running. |
| • | The vehicle is in PARK. |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON, Engine OFF, All Doors Closed | |||
Accy/RAP Relay Command | Power Mode | On/Off | On |
Battery Voltage | Charging Info | Volts | Varies |
Current Power Mode | Power Mode | Off/Accessory/Run/Crank Request | Run |
Driver Door Ajar Sw. | Doors | Door Closed/Door Ajar | Door Closed |
Driver Door Open Sw. | Doors | Closed/Open | Closed |
HS Comm. Cmd. | Outputs | On/Off | On |
Ign. Off/Run/Crank | Power Mode | Key Out/ACC Key In/Off Crank Run | Run |
Ignition Accessory/Run | Power Mode | Active/Inactive | Active |
Ignition Run/Crank | Power Mode | Active/Inactive | Active |
Key in Ignition Status | Power Mode | Key Out/Key In | Key In |
Left Rear Door Ajar Sw. | Doors | Door Closed/Door Ajar | Door Closed |
Passenger Door Ajar Sw. | Doors | Door Closed/Door Ajar | Door Closed |
Passenger Door Open Sw. | Doors | Closed/Open | Closed |
Powertrain HS Comm. Cmd. | Outputs | On/Off | On |
Right Rear Door Ajar Sw. | Doors | Door Closed/Door Ajar | Door Closed |
Run/Crank Relay Command | Power Mode | On/Off | On |
