Removal Procedure
Important: DO NOT remove the screws from the upper air cleaner cover.
- Loosen the air cleaner cover screws (1).
- Open the air cleaner cover.
- Remove the air filter from the air cleaner.
Important: The air cleaner cover has a hydro carbon adsorber that is not serviceable. If the adsorber shows any kind of physical damage the cover must be replaced.
- Inspect the air cleaner housing assembly for damage. If a problem is found, replace as necessary.
Installation Procedure
- Install the air filter to the air cleaner.
- Close the air cleaner cover. Ensure that the inboard hinges are engaged prior to tightening the screws.
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the air cleaner cover screws (1).
Tighten
Tighten the screws to 3 N·m (27 lb in).