Steering Wheel Position Sensor Replacement. Cadillac DTS 2007

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2007 🢒 DTS 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Steering Wheel Position Sensor Replacement

Steering Wheel Position Sensor Replacement Manual Steering Column with JL4

Callout	Component Name
Preliminary Procedure Remove the intermediate steering shaft. Refer to Intermediate Steering Shaft Replacement .
1	Steering Angle Sensor Adapter
2	Steering Wheel Position Sensor Procedure Disconnect any electrical connectors as needed. Tip If reusing, secure the old steering wheel position sensor before removing it for proper alignment upon reinstallation. Refer to Steering Wheel Position Sensor Centering .

Callout

Component Name

Preliminary Procedure

Remove the intermediate steering shaft. Refer to Intermediate Steering Shaft Replacement .

Steering Angle Sensor Adapter

Steering Wheel Position Sensor

Procedure

Disconnect any electrical connectors as needed.

Tip
If reusing, secure the old steering wheel position sensor before removing it for proper alignment upon reinstallation. Refer to Steering Wheel Position Sensor Centering .

Steering Wheel Position Sensor Replacement Power Steering Column with JL4

Callout	Component Name
Preliminary Procedure Remove the intermediate steering shaft. Refer to Intermediate Steering Shaft Replacement .
1	Steering Shaft Seal
2	Steering Shaft Lower Bearing Seal Retainer
3	Steering Wheel Position Sensor Procedure Disconnect any electrical connectors as needed. Tip If reusing, secure the old steering wheel position sensor before removing it for proper alignment upon reinstallation. Refer to Steering Wheel Position Sensor Centering .