For 1990-2009 cars only
LF, LR, RF, RR Pressure Status: The scan tool displays the overall condition of the tire. The conditions that display are Unknown, Normal, Low, Flat and High.
LF, LR, RF, RR Pressure Sensor Mode: This data parameter indicates the mode contained in the last transmission received from the left front tire pressure sensor. The scan tool displays Entering Off, Exiting Off, Rolling, Re-measure, Learn. Entering Off indicates the sensors internal roll switch is opened and the sensor has made its stationary transmission which only occurs once every 60 minutes from the last stationary transmission. Exiting Off indicates the sensor has transition to Rolling mode. In this mode the sensor has detected an initial roll switch closure. Rolling indicates the sensors internal roll switch has been closed for at least 10 seconds. In this mode the sensor is transmitting once every 60 seconds. Re-measure indicates the sensor has detected a 8 KPa (1.2 psi) change in tire pressure. This mode occurs to keep the system updated as to any changes in tire pressure. Learn indicates the sensor has been activated by a low frequency (LF) signal. Low Bat indicates the sensor's internal battery charge level is low. N/A indicates the sensor is in a mode not supported by the scan tool.
LF, LR, RF, RR Tire Pressure: The scan tool displays 0-703 kPa (0-102 psi). The actual pressure of the left front tire.
LF, LR, RF, RR Tire Pressure Sensor Battery Status: The scan tool displays low or OK. The Low Battery indicates the sensors internal batter charge level is low.
LF, LR, RF, RR Tire Press. Sensor Status: The scan tool displays normal or failed.
Learn in Progress: The scan tool displays yes, or no. Yes indicates the Tire Pressure Monitor (TPM) systems tire pressure sensor learn mode is active and able to learn all 4 sensor Id codes. No indicates the TPM system is not able to learn the sensor Id codes.
Tire Pressure Indicator Request: The scan tool displays yes or no.
TPM System Enabled: The scan tool displays Yes, or No. Yes indicates the TPM option has been enabled in the RCDLR. No indicates the TPM option has not been enabled in the RCDLR.
Vehicle Speed Signal: The scan tool displays 0-255 km/h (0-159 mph). The actual speed of the vehicle.
LF, LR, RF, RR Pressure Sensor Mode: This data parameter indicates the mode contained in the last transmission received from the left front tire pressure sensor. The scan tool displays Entering Off, Exiting Off, Rolling, Re-measure, Learn. Entering Off indicates the sensors internal roll switch is opened and the sensor has made its stationary transmission which only occurs once every 60 minutes from the last stationary transmission. Exiting Off indicates the sensor has transition to Rolling mode. In this mode the sensor has detected an initial roll switch closure. Rolling indicates the sensors internal roll switch has been closed for at least 10 seconds. In this mode the sensor is transmitting once every 60 seconds. Re-measure indicates the sensor has detected a 8 KPa (1.2 psi) change in tire pressure. This mode occurs to keep the system updated as to any changes in tire pressure. Learn indicates the sensor has been activated by a low frequency (LF) signal. Low Bat indicates the sensor's internal battery charge level is low. N/A indicates the sensor is in a mode not supported by the scan tool.
LF, LR, RF, RR Tire Pressure: The scan tool displays 0-703 kPa (0-102 psi). The actual pressure of the left front tire.
LF, LR, RF, RR Tire Pressure Sensor Battery Status: The scan tool displays low or OK. The Low Battery indicates the sensors internal batter charge level is low.
LF, LR, RF, RR Tire Press. Sensor Status: The scan tool displays normal or failed.
Learn in Progress: The scan tool displays yes, or no. Yes indicates the Tire Pressure Monitor (TPM) systems tire pressure sensor learn mode is active and able to learn all 4 sensor Id codes. No indicates the TPM system is not able to learn the sensor Id codes.
Tire Pressure Indicator Request: The scan tool displays yes or no.
TPM System Enabled: The scan tool displays Yes, or No. Yes indicates the TPM option has been enabled in the RCDLR. No indicates the TPM option has not been enabled in the RCDLR.
Vehicle Speed Signal: The scan tool displays 0-255 km/h (0-159 mph). The actual speed of the vehicle.
