Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the right front wheelhouse panel liner. Refer to Front Wheelhouse Liner Replacement .
2. Drain the washer solvent into a suitable clean container.
3. Disconnect the electrical connector at the windshield washer pump.

1

Hose, Windshield Washer Pump

2

Pump, Windshield Washer

Tip

1. Use 2 flat-bladed tools and pry upward in order to release the washer pump from the washer solvent container grommet.
2. Discard the old washer pump grommet.

3

Grommet, Windshield Washer Pump

Tip

1. Install a new grommet into the washer solvent container prior to installing the new washer pump.
2. Lubricate the new grommet with straight washer fluid.