Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Open the hood.
2. Disconnect the 2 electrical connectors for the washer solvent heater.

1

Connector, Electrical 2-Way Washer Solvent Heater

2

Connector, Electrical 6-Way Washer Solvent Heater

3

Nuts, Washer Solvent Heater (Qty: 2)

Tighten
9 N·m (80 lb in)

4

Hose, Windshield Washer Solvent to Washer Pump

Tip
Disconnect the washer hose from the topside of the washer solvent heater.

5

Heater Assembly, Windshield Washer Solvent

Tip
Remove the heater assembly from the engine compartment.