Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the wiper arm blades. Refer to Windshield Wiper Blade Replacement .

1

Windshield Washer Transmission Nut Cap

Tip
Use a small flat-bladed tool to remove the transmission cap.

2

Windshield Washer Transmission Support Nut

Tip
Hold the wiper arm blade tip to the target points in the lower blackout area of the windshield while tightening the nut.

Tighten
32 N·m (24 lb ft)

3

Windshield Wiper Arm Hose

Tip
Disconnect the hose from the air inlet grille panel elbow.

4

Windshield Washer Arm Assembly

Tip
Slightly rock the arm on the wiper pivot shaft to remove.

5

Windshield Wiper Blade Target Points

Tip
Hold the wiper arm blade tip to the target points in the lower blackout area of the windshield while tightening the wiper arm transmission nut.