Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedures

1. Remove the right front wheelhouse panel liner. Refer to Front Wheelhouse Liner Replacement .
2. Drain the washer solvent into a suitable clean container.
3. Disconnect the electrical connector at the windshield washer level sensor switch.

1

Switch, Windshield Washer Level Sensor

Tip
Use two flat-bladed tools and pry outward in order to release the level sensor from the washer solvent container grommet.

2

Grommet, Windshield Washer Level Sensor

Tip

1. Discard the old level sensor grommet.
2. Install a new grommet into the washer solvent container prior to installing the new level sensor.
3. Lubricate the new grommet with straight washer fluid.