Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Place the front door window in the full down position.
2. Remove the front door interior trim panel. Refer to Front Side Door Trim Panel Replacement .
3. Remove the front door garnish molding. Refer to Front Side Door Opening Frame Garnish Molding Replacement .
4. Remove the front door outside mirror. Refer to Power Mirror Replacement .
5. Pull the window channel sealing strip from the channel to access the reveal molding screws.

1

Screw, Front Door Frame Reveal Molding (Qty: 9)

Tighten
1.3 N·m (12 lb in)

2

Reveal Molding, Front Door Window Frame

Tip

1. Use a plastic flat-bladed tool to release the push-in retainers from the B-pillar of the door.
2. Pull the reveal molding from the window flange.