Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Place the window in the full up position.
2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
3. Remove the rear door inner belt sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement .
4. Remove the rear door window garnish molding. Refer to Rear Door Opening Frame Garnish Molding Replacement .
5. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
6. Remove the rear door window regulator. Refer to Rear Side Door Window Regulator Replacement .
7. Remove the rear door window. Refer to Rear Side Door Window Replacement .

1

Bolt, Rear Door Stationary Window Division Post

Tighten
9 N·m (80 lb in)

2

Window, Rear Door Stationary

Tip

1. Pull the stationary window sealing strip from the door frame.
2. Tip the stationary window forward to remove it from the door.