Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Position the rear door window approximately half way down in the door.
2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
3. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
4. Tape the window to the door frame to prevent it from moving.
5. Remove the rear door window regulator. Refer to Rear Side Door Window Regulator Replacement .
6. Refer to Control Module References for replacement and setup information.

1

Screw, Rear Door Window Regulator Motor (Qty: 3)

Tighten
4.6 N·m (41 lb in)

2

Motor, Rear Door Window Regulator

Tip
Disconnect the electrical connector from the window regulator motor.