Disc Brake Component Specifications. Cadillac DTS 2007

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2007 🢒 DTS 🢒 Brakes 🢒 Disc Brakes 🢒 Disc Brake Component Specifications

Disc Brake Component Specifications J55

Application	Specification
Application	Metric	English
Front Brake Pads
Taper	0.15 mm	0.006 in
Front Brake Rotors
Rotor Diameter	330.0 mm	12.99 in
Rotor Discard Thickness	36.0 mm	1.417 in
Rotor Maximum Allowable Assembled Lateral Runout	0.05 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Minimum Allowable Thickness after Refinishing	37.0 mm	1.457 in
Rotor Thickness (New)	38.0 mm	1.496 in
Rear Brake Pads
Taper	0.15 mm	0.006 in
Rear Brake Rotors
Rotor Diameter	325.0 mm	12.79 in
Rotor Discard Thickness	18.50 mm	0.728 in
Rotor Maximum Allowable Assembled Lateral Runout	0.05 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Minimum Allowable Thickness after Refinishing	19.0 mm	0.748 in
Rotor Thickness (New)	20.0 mm	0.787 in
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specification.

Application	Specification
Application	Metric	English
Front Brake Pads
Taper	0.15 mm	0.006 in
Front Brake Rotors
Rotor Diameter	323.0 mm	12.72 in
Rotor Minimum Thickness	28.6 mm	1.126 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Thickness	30.0 mm	1.181 in
Rear Brake Pads
Taper	0.15 mm	0.006 in
Rear Brake Rotors
Rotor Diameter	292.00 mm	11.50 in
Rotor MinimumThickness	10.5 mm	0.413 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Thickness	12.00 mm	0.472 in
* All brake rotors have a minimum thickness dimension cast into them. Replace any rotor that is worn or machined below this specification.