Checks | Causes |
---|---|
DEFINITION: Gear engagement that takes longer than 3 seconds when the engine is idling in PARK or NEUTRAL and the gear selector is moved to DRIVE or REVERSE range | |
Automatic Transmission Fluid Level | Low fluid level |
Transmission Line Pressure | Low transmission line pressure |
Manual Shift Valve Position | Manual shift valve (916) position off location due to linkage adjustment or damage |
Reverse Clutch Piston Apply Seals | Reverse clutch piston apply seals (inner 506, outer 507) damaged or rolled |
Lo/Reverse Band Servo Piston Seal | Servo piston seals (small 929, large 930) damaged or rolled |
Lo/Reverse Band Assembly | Lo/Reverse band assembly (13) excessive wear or damaged |
Reverse Orifice By-Pass Valve | Reverse orifice by-pass valve (921) binding or damaged |
Number 7 Ball Check Valve | Number 7 ball check valve seat damaged or debris under ball |
Reverse Accumulator Piston Seal | The reverse accumulator seal is damaged or rolled |
Forward Clutch Piston Apply Seals | Forward clutch piston apply seals (inner 808, outer 809) damaged or rolled |
Forward Orifice By-Pass Valve | Forward orifice by-pass valve (924) binding or damaged |
Number 5 Ball Check Valve | Number 5 ball check valve seat damaged or debris under ball |
Forward Accumulator Piston Seal | Forward accumulator piston seal damaged or rolled |
Number 8 Ball Check Valve | Number 8 ball check valve seat damaged or debris under ball |