For 1990-2009 cars only
Removal Procedure
- Set the park brake and chock the wheels.
- Fully lift the retainer from the transaxle range selector cable mechanism.
- Disconnect the transaxle range selector cable terminal from the transaxle manual shift lever pin (1).
- Press the locking tabs inward in order to release the transaxle range selector cable (2) from the bracket.
- Remove the left closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
- Disconnect the transaxle range selector cable terminal from the shift lever pin.
- Remove the retainer from the transaxle range selector cable mechanism.
- Press the locking tabs (1) inward in order to release the transaxle range selector cable (2) from the bracket.
- Unplug the shift cable grommet at the cowl panel and remove the shift cable from the vehicle.
Installation Procedure
- Install the shift cable through the cowl panel and seat the grommet.
- Slide the transaxle range selector cable (2) fully into the bracket until it snaps into place.
- Connect the transaxle range selector cable terminal to the shift lever pin.
- Install the retainer to the transaxle range selector cable mechanism.
- Install the left closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
- Insert the transaxle range selector cable (2) into the bracket.
- Connect the transaxle range selector cable terminal to the transaxle manual shift lever pin (1).
- Install the retainer to the transaxle range selector cable mechanism.
- Adjust the automatic transmission range selector cable. Refer to Range Selector Lever Cable Adjustment .
