Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement. Cadillac DTS 2007

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2007 🢒 DTS 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement

Callout

Component Name

Preliminary Procedure

Remove the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement.

Steering Shaft Lock Plate Retaining Ring

Procedure

Use compressor J 23653-SIR and adapter J 42137 to remove the steering shaft lock plate retaining ring.

Tip
Do not reuse the steering shaft lock plate retaining ring. Replace it.

Special Tools

•	J 23653-SIR Steering Column Lock Plate Compressor

•	J 42137 Cam Orientation Plate Adapter

Steering Shaft Lock Plate

Tip
The steering shaft lock plate can only be installed one way, align it to the solitary larger spline on the steering shaft.

Turn Signal Cancel Cam

Tip
Ensure the turn signal cancel cam is aligned to the turn signal multifunction switch when reinstalling.

Steering Shaft Upper Bearing Spring