Removal Procedure
- Install a drain pan under the vehicle.
- Remove the power steering pressure hose from the power steering pump.
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Remove the power steering gear heat shield. Refer to
Steering Gear Heat Shield Replacement
.
- Remove the wheelhouse liner. Refer to
Front Wheelhouse Liner Replacement
.
- Remove the power steering pressure hose bracket retaining nut (2) at the cylinder head.
- Disconnect the power steering pressure hose from the bracket at the frame.
- Disconnect the power steering pressure hose from the power steering gear.
- Remove the power steering pressure hose from the vehicle.
Installation Procedure
- Install the power steering pressure hose to the vehicle.
- Connect the power steering pressure hose to the bracket at the frame.
Notice: Refer to Fastener Notice in the Preface section.
- Install the power steering pressure hose to the power steering gear.
Tighten
Tighten the power steering pressure hose to power steering gear to 27 N·m (20 lb ft).
- Install the power steering pressure hose bracket and retaining nut to the cylinder head.
Tighten
Tighten power steering pressure hose bracket retaining nut (2) to cylinder head to 9 N·m (80 lb in).
- Install the wheelhouse liner. Refer to
Front Wheelhouse Liner Replacement
.
- Install the power steering gear heat shield. Refer to
Steering Gear Heat Shield Replacement
.
- Lower the vehicle.
- Install the power steering pressure hose to the power steering pump.
Tighten
Tighten the power steering pressure hose to power steering pump to 27 N·m (20 lb ft).
- Remove the drain pan from under the vehicle.
- Bleed the power steering system. Refer to
Power Steering System Bleeding
.