Preliminary Procedures

1. Remove the right front wheelhouse panel liner. Refer to Front Wheelhouse Liner Replacement .
2. Drain the washer solvent into a suitable clean container.
3. Disconnect the electrical connector from the windshield washer solvent level sensor.
4. Disconnect the electrical connector at the windshield washer pump.

1

Windshield Washer Level Sensor Switch

2

Windshield Washer Pump Hose Assembly

Tip
Disconnect the hose from the windshield washer pump spout and drain washer solvent into a suitable clean container.

3

Windshield Washer Solvent Container Nut (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Transfer the level sensor and washer pump to the new washer solvent container.

Tighten
6 N·m (53 lb in)

4

Windshield Washer Container Assembly

Tip
Lower the windshield washer container from RH chassis rail.