Preliminary Procedures

1. Position window approximately half way down in the door.
2. Remove the interior trim panel. Refer to Front Side Door Trim Panel Replacement.
3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement.
4. Tape the window to door frame to prevent it from moving.
5. Remove the front door window regulator. Refer to Front Side Door Window Replacement.
6. Refer to Control Module References for replacement and setup information.

1

Front Side Door Window Regulator Motor Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
4.6 N·m (41 lb in)

2

Front Side Door Window Regulator Motor

Tip
Disconnect the electrical connector from the window regulator motor.