Removal Procedure
Caution:
| • | Handle the MAF sensor carefully. |
| • | Do not drop the MAF sensor in order to prevent damage to the MAF sensor. |
| • | Do not damage the screen located on the air inlet end of the MAF. |
| • | Do not touch the sensing elements. |
| • | Do not allow solvents and lubricants to come in contact with the sensing elements. |
| • | Use a small amount of a soap based solution in order to aid in the installation. |
- Disconnect the engine harness electrical connector from the mass air flow/intake air temperature (MAF/IAT) sensor.
- Loosen the air cleaner outlet duct clamp at the throttle body.
- Loosen the air cleaner outlet duct clamp at the MAF/IAT sensor.
- Remove the air cleaner outlet duct.
- Remove the MAF/IAT sensor bolts.
- Remove the MAF/IAT sensor.
Installation Procedure
Caution:
| • | Handle the MAF sensor carefully. |
| • | Do not drop the MAF sensor in order to prevent damage to the MAF sensor. |
| • | Do not damage the screen located on the air inlet end of the MAF. |
| • | Do not touch the sensing elements. |
| • | Do not allow solvents and lubricants to come in contact with the sensing elements. |
| • | Use a small amount of a soap based solution in order to aid in the installation. |
- Install the MAF/IAT sensor.
Caution: Refer to Fastener Caution in the Preface section.
- Install the MAF/IAT sensor bolts.
Tighten
Tighten the bolts to 4 N·m (35 lb in).
- Install the air cleaner outlet duct.
- Tighten the air cleaner outlet duct clamp at the MAF/IAT sensor.
Tighten
Tighten the clamp to 4 N·m (35 lb in).
- Tighten the air cleaner outlet duct clamp at the throttle body.
Tighten
Tighten the clamp to 4 N·m (35 lb in).
- Connect the engine harness electrical connector to the MAF/IAT sensor.
