Rear Body Mount Replacement FE7

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tires and the wheels. Refer to Tire and Wheel Removal and Installation.
3. Using a block of wood and a suitable jack, support the exhaust and the rear support assembly.



4. Remove the exhaust system. Refer to Exhaust System Replacement.



5. Remove the center support brackets (1).
6. Remove the two rear support assembly bolts.
7. Lower the rear of the support assembly.



8. Remove the two bolts at the body mount.
9. Remove the rear body mount.

1. Install the rear body mount.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the bolts securing the body mount.

Tighten
Tighten the bolts to 77 N·m (57 lb ft).




3. Raise the support assembly.
4. Install the two rear bolts securing the support assembly to the vehicle body.

Tighten
Tighten the bolts to 207 N·m (153 lb ft).




5. Install the center support bracket bolts (1).

Tighten
Tighten the center support bracket bolts to 128 N·m (94 lb ft).




6. Refer to Exhaust System Replacement.
7. Install the tires and the wheels. Refer to Tire and Wheel Removal and Installation.

Tighten
Tighten the wheel nuts to 125 N·m (80 lb ft).

8. Lower the vehicle.
9. Inspect and adjust the rear toe. Refer to Rear Toe Adjustment.

Rear Body Mount Replacement FE1 and FE3

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tires and the wheels. Refer to Tire and Wheel Removal and Installation.
3. Using a block of wood and a suitable jack, support the rear support assembly.
4. Remove the 2 rear support assembly bolts.



5. Remove the exhaust system. Refer to Exhaust System Replacement.
6. Lower the rear of the support assembly.



7. Remove the 2 bolts at the body mount.
8. Remove the rear body mount.

1. Install the rear body mount.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the bolts securing the body mount.

Tighten
Tighten the bolts to 77 N·m (57 lb ft).




3. Raise the support assembly and the exhaust.
4. Install the 2 rear bolts securing the support assembly to the vehicle body.

Tighten
Tighten the bolts to 181 N·m (133 lb ft).




5. Install the 4 exhaust hangers.
6. Install the tires and the wheels. Refer to Tire and Wheel Removal and Installation.
7. Lower the vehicle.
8. Inspect and adjust the rear toe. Refer to Rear Toe Adjustment.