GM Service Manual Online
For 1990-2009 cars only

    Object Number: 297349  Size: SH
  1. Loosen the jam nut (2) on the tie rod.
  2. Caution: Care must be taken so that the boots are not twisted when rotating the inner tie rod, or damage to the boots may result.

  3. Rotate the inner tie rod to the required toe specification setting.
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Tighten the jam nut on the tie rods.
  6. Tighten
    Tighten the jam nut to 60 N·m (44 lb ft).

  7. Recheck the toe settings after tightening the jam nut.
  8. Readjust the toe setting if necessary.