GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 DTS 🢒 Body Systems 🢒 Fixed and Moveable Windows 🢒 Windshield Side Reveal Molding Replacement

Removal Procedure

    Object Number: 1644013 Size: SH
  1. Starting at the bottom of the reveal molding, pull the weatherstrip (1) off of the windshield pillar flange.
  2. Pull back the rubber extension under the fender.
  3. Remove the screws (2) from the reveal molding (3).
  4. Remove the reveal molding.

Installation Procedure

    Object Number: 1644013 Size: SH
  1. Insert the reveal molding (3) to the pillar.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the screws (2) to the reveal molding (3).

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Tuck the rubber extension under the fender.
  4. Install the weatherstrip (1) to the windshield pillar flange.