For 1990-2009 cars only
- Install the secondary pump gears (205, 206) into the secondary pump body (203).
- Install the primary pump gears (201, 202) into the primary pump body (200).
- Inspect the pump gears (201, 202, 205, 206). These gears must be installed with the dimples facing up.
- Install the scavenge pump cover (237) onto the primary pump body (200) over the dowel bushings (227). Tap the dowels in place to that they stick out of both the primary pump body and the scavenge cover.
- Install the scavenge pump cover and primary body assembly (200/237) onto the secondary pump body (203). Press the entire assembly firmly together.
- Install the oil pump driven shaft (207) into the pump assembly. The end of the shaft with the four notches is located in the secondary pump.
- Install the scavenge pump drive gear (223) over the pump driven shaft.
- Align the scavenge pump driven gears (224) next to the drive gear (223). Install the scavenge pump body (225) onto the scavenge pump cover. Locate the scavenge pump driven gear pins into the scavenge pump driven gears (224). Press firmly into position.
- Install the two 10-mm bolts (226) through the scavenge pump cover (237) to the scavenge pump body (225) and tighten to 11-13 N·m (8.0-9.5 lb ft).
Caution: Refer to Fastener Caution in the Preface section.
