Removal Procedure
- Remove the case extension. Refer to
Case Extension Replacement.
- Rotate the manual shaft (16) counterclockwise in order to place the transmission in park and prevent the differential from rotating.
- Remove the four 15 mm differential bolts (119).
- Remove the differential carrier (110).
Installation Procedure
- Locate the dowels on the final drive carrier (100) and insert these dowels into the holes in the differential carrier (110) for proper assembly.
Caution: Refer to Fastener Caution in the Preface section.
- Install the differential carrier bolts (119).
Tighten
Tighten the bolts using a star pattern to 70-76 N·m (52-56 lb ft).
- Install the case extension. Refer to
Case Extension Replacement.