Preliminary Procedures

1. Position the rear door window approximately half way down in the door.
2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement.
3. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement.
4. Tape the window to the door frame to prevent it from moving.

1

Rear Door Window Regulator Nut (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tip

1. Loosen the window to regulator bolts.
2. Release the window regulator from the window and door.

Tighten
9 N·m (80 lb in)

2

Rear Door Window Regulator

Tip
Disconnect the electrical connector from the regulator.