Callout
| Component Name
|
Preliminary Procedures
- Remove the compartment sill plate. Refer to
Rear Compartment Sill Trim Plate Replacement.
- Remove rear wheel liners. Refer to
Rear Wheelhouse Panel Liner Replacement.
|
1
| Rear Fascia Push Pin Retainer (Qty: 2)
|
2
| Rear Fascia Nut (Qty: 4)
Caution: Refer to Fastener Caution in the Preface section.
Tighten
10 N·m (89 lb in) |
3
| Rear Fascia Bolt (Qty: 2)
|
4
| Rear Fascia Bolt (Qty: 6)
|
5
| Rear Fascia
Tip
| • | Energy absorber and fascia are removed together. Cannot be separated on vehicle. |
| • | Reposition the wire harness. |
| • | Disconnect the electrical connectors. |
| • | Transfer components as necessary. |
|
