Tools Required

J-45725 Frame Bushing Installer

1. Remove the frame. Refer to Front Frame Replacement .
2. Remove cradle bushing with a rubber mallet.

1. Install clamp J-45725 onto the bushing leaving about an 1/8 inch from the bottom of the bushing.



2. Align the split of the bushing to the front of the frame.



3. Using J-45725 install the bushing until the entire radius of the bushing is halfway recessed in the cradle.



4. Remove the J-45725 clamp.



5. Using J-45725 install the bushing until the lip of the bushing is fully seated to the bottom of the cradle assembly.
6. Install the frame. Refer to Front Frame Replacement .