GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 DTS 🢒 Steering 🢒 Power Steering 🢒 Steering Gear Heat Shield Replacement

Removal Procedure

    Object Number: 293350 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement.
  3. Rotate the stabilizer shaft downward.
  4. Remove the electrical harness clip from the power steering gear heat shield.
  5. Remove power steering gear heat shield mounting bolts.
  6. Remove the power steering gear heat shield.

Installation Procedure

    Object Number: 293350 Size: SH
  1. Install the power steering gear heat shield.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the power steering gear heat shield mounting bolts.

    3. Tighten
    Tighten the power steering gear heat shield mounting bolts to 9 N·m (79 lb in).

  3. Install the electrical harness clip to the power steering gear heat shield.
  4. Rotate the stabilizer shaft into position.
  5. Install the stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement.
  6. Lower the vehicle.