1

Cruise Control Module Assembly

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Loosen the bolts that hold the cruise control module into the T-slots on the tie bar.
2. Disconnect the electrical connector.
3. Slide the module out of the T-slots on the bracket.
4. Replace the module by sliding the assembly into the T-slots on the bracket and tighten.

Mandatory tightening sequence.

5. Verify proper alignment of the module. Refer to Distance Sensing Cruise Control Aiming.
6. For replacement and setup information, refer to Control Module References.

Tighten
9 N·m (80 lb in)