Transmission Control Module Replacement. Cadillac DTS 2009

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2009 🢒 DTS 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Transmission Control Module Replacement

Callout

Component Name

Transmission Control Module (TCM)

Tip

•	Disconnect the TCM electrical connector.

•	A new TCM requires programming. Refer to Control Module References for programming and setup information.

•

It is recommended that transmission adaptive pressure (TAP) information be reset. Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, the engine control module (ECM), powertrain control module (PCM) or TCM will need to relearn TAP values. Transmission performance may be affected as new TAP values are learned. Reset the TAP values.

•	Twisting or tilting of the transmission control module electrical connector while disconnecting may result in bent or misaligned electrical terminal pins.

TCM Bracket Nut (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

TCM Bracket