Preliminary Procedures

1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Disconnect the seat belt from the front seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front.

1

Front Seat Assembly Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Adjust the seat to the full forward position to gain access to the rear bolts.
2. Remove the rear adjuster trim covers to access the bolts.

Tighten
45 N·m (33 lb ft)

2

Seat Assembly

Procedure

1. Tilt the seat forward and lift up to release the front of the seat, recline the seat back if needed for clearance.
2. Disconnect the electrical connectors.