THM 200 & 200C FORWARD CLUTCH TURBINE SHAFT

The forward clutch turbine shaft used on the THM 200-C (Torque Converter Clutch) transmission is longer than that used on past model THM 200 transmissions (see illustration).

Either forward clutch turbine shaft can be used when servicing the THM 200 transmission, but only the longer one can be used in the THM 200-C transmission.

When installing the long forward clutch turbine shaft into the THM 200 transmission, the O-ring located above the spline on the shaft is not required. The O-ring is required when servicing the THM 200-C transmission.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.