REVISION: 02/21/95
THIS BULLETIN IS BEING REVISED TO ADD THE 1995 MODEL YEAR. PLEASE DISCARD BULLETIN 431043 (GROUP REFERENCE 10 - BODY). ---------------------------------------------------------------------- REVISION: 12/20/95
THIS BULLETIN IS BEING REVISED TO ADD THE 1996 MODEL YEAR, REVISE THE CORRECTION PROCEDURE AND UPDATE PARTS INFORMATION. PLEASE DISCARD BULLETIN 43-10-43A (SECTION 10 - BODY). *********************************************************************
SOME OWNERS MAY COMMENT THAT THE FRONT DOORS MAY NOT STAY OPEN ON SLIGHT GRADES.
REPLACE THE LOWER HINGE ASSEMBLY WITH P/N 16632002 (RH) AND P/N 16632003 (LH).
USE APPROPRIATE SERVICE MANUAL FOR REMOVAL AND INSTALLATION PROCEDURES.
1. PAINT NEW HINGE ASSEMBLY.
2. REMOVE LOWER HINGE ASSEMBLY.
3. INSTALL HINGE ASSEMBLY AND ALIGN DOOR.
- TIGHTEN DOOR HINGE BOLTS TO 48 N.M (36 LB FT).
4. TOUCH UP PAINT.
PARTS ARE EXPECTED TO BE AVAILABLE ON DECEMBER 18, 1995.
FOR VEHICLES REPAIRED UNDER WARRANTY, USE:
LABOR OPERATION NUMBER: B4014 (RIGHT SIDE) B4015 (LEFT SIDE) USE PUBLISHED LABOR OPERATION TIME.
FIGURES: 00 ATTACHMENTS: 00
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1995 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.
******************************************************************